KOYO st5195 Bearing

C0:6.65 kN; H1:15 mm; J:95 mm; T min.:-20 °C; Dz:54 mm; s1:15.5 mm; N:13mm; N1:19 mm; A1:22 mm; S:12.7 mm;

Recommended tightening torque for set screw:11.5 Nm; C:19.5 kN; d1:44.1 mm; L:80 mm; e:18 mm; S:9 mm; Designation of bearing:ES206G2; Weight:0.98 kg; Designation of housing:FL206N-; B1:35.7 mm;

Cg - Geometry Factor:0.0676; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2170 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:4640 lbf; Design Units:Imperial; db - Cone Backface Backing Diameter:1.97 in; K - Facto

G:R1/8"; T min.:-20 °C; Designation of housing:PE204N-; C0:6.65 kN; Weight:0.59 kg; Designation of bearing:US204-12G2T20; A:32 mm; S:7 mm; B:25 mm; N:11mm;

Type symbol:No; Days to Ship:8 Days or more; d:70; Retainer Type:Momi removing; Number of Raceway Ring Rows:Double Row; Preload:Normal preload; Bearing Style:Open Type; Width(mm):20; O.D.(Ø):110; Load Direction:Radial;

S:10.2 mm; Designation of bearing:US209-27G2T04; L:320 mm; B:41.2 mm; Designation of housing:SP208-210/85N-; C0:20.8 kN; L1:260 mm; H:120 mm; Z:69.3 mm; d:42.86 mm;

G1 - Heat Generation Factor (Roller-Raceway):39.5; B - Cone Width:32.500 mm; WPD:78.9 mm; Ab - Cage-Cone Frontface Clearance:2.5 mm; Series:JF4000; Design Units:METRIC; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16500 lbf; db - Cone Backface Backing Diameter:55 mm; C1 - Dynami

Characteristic cage frequency, FTF:0.4 Hz; Db min:58.5 mm; a max:2.46 mm; d:25 mm; Characteristic outer ring frequency, BPF0:3.58 Hz; Nlim:17,000 rpm; Mass:0.12 kg; da max:31.8 mm; Max operating temperature, Tmax:120 °C; da min:30 mm;

Retainer Type:Resin Forming; Outer Ring:With Outer Ring; Specifications, Environment:Standard; Combination of Angular Contact Ball Bearings:Single Row; Load Direction:Radial; Type:Angular Contact Ball; O.D.(Ø):125; Symbol of contact angle:C; Basic Dynamic Load Rating(N):58500; Size Standards:Metric

G2 - Heat Generation Factor (Rib-Roller End):10.1; Da - Cup Frontface Backing Diameter:66.00 mm; r - Cup Backface To Clear Radius2:2.03 mm; Series:26000; Cage Type:Stamped Steel; Cg - Geometry Factor:0.063; D:71.999 mm; Db - Cup Backface Backing Diameter:61.98 mm; d:30 mm; e - ISO Factor8:0.36;

G:M120x2; d1:4 1/4 in; Locknut:KM24; C:22 mm; Weight:2.80 Kg; L1:88.00 mm; Lockwasher and Lockplates:MB24; D3:155 mm; Appropriate Hydraulic Nut:HMV24;

Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Thickness T(mm):40 ～ 60; Height H(mm):40 ～ 80; Type:Bearings with Housin; Number of Bearings:Double; Thickness, Height Indication:T Selection, h Confi; Bearing Part Number:6005;

L3:51 mm; SW:3.18 mm; C0:6.65 kN; G:M6x1; L2:10 mm; B:34 mm; T max.:100 °C; S:17 mm; A1:12 mm; Designation of bearing:EX203-11G2T04;

Flange Shape:Compact Type; Width T(mm):50 ～ 70; Shape:Flanged Pilot Type; Bearing I.D. d(mm):17; Days to Ship:7 Days; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Double; Seals:DD (Contact Rubber S; Bearing Retained:No;

H1:11 mm; Dz:70 mm; A:38 mm; S:15.9 mm; H2:82 mm; Weight:0.94 kg; N:M10; E:12.5 mm; A1:25 mm; L:98 mm;